Board index » Foyer » English

 

Post new topic Reply to topic
Author Message
 Post subject: Re: New Here!
PostPosted: Fri Jun 01, 2012 7:03 pm

User avatar

Joined: Mon Jun 13, 2011 4:22 pm
Posts: 12
may i advice you to get some of those tuning rings as they are used there?: http://www.handpan.org/forum/viewtopic. ... 3&start=10


          Top  
 
 Post subject: Re: New Here!
PostPosted: Sat Jun 02, 2012 1:52 pm


Joined: Wed May 16, 2012 4:55 pm
Posts: 17
Hello All,

I haven't given up, I've figured out most of the steps but am stuck on the gas nitriding. I could do this myself, but it requires licenses for the material (anhydrous ammonia) and is just plain nasty stuff, that I would really rather outsource, if possible. If anyone here has any idea where I could get this process done for me (hopefully not for thousands of dollars, as I can't afford that) I'd really appreciate the help.

BTW, after trying out several methods of curving/cupping metal myself, I have come across what I think would be the best method. It entails clamping a piece of 18 AWG mild steel sheet metal between two 3/4" thickness (length) very large (~21" ID, 24" OD) pipe rings, and either using the press and mandrel method, or just hammering it into form while held. You must *stretch* the metal. If anyone else is trying a build, just start with this method and save your time and money.

-Steve


          Top  
 
 Post subject: Re: New Here!
PostPosted: Mon Jun 18, 2012 2:22 am


Joined: Wed May 16, 2012 4:55 pm
Posts: 17
Hi,
I am still on a mission to build a hand pan. I am now looking for the right steel to build my hung out of. If anyone can find a source for 18 AWG German DC04 steel, I would be eternally grateful. I have managed to pound out a bowl shape from some steel sheet, sandwiched between my shiny new rings of pipe:

Image
Image
Image
Image
Image
Image

~Steve


          Top  
 
 Post subject: Re: New Here!
PostPosted: Tue Jun 19, 2012 9:49 pm

User avatar

Joined: Mon Jun 13, 2011 4:22 pm
Posts: 12
there appeared another video, that might help you:
http://www.youtube.com/watch?v=yTN4kKMu ... r_embedded


          Top  
 
 Post subject: Re: New Here!
PostPosted: Wed Jun 20, 2012 3:10 pm

familienvater wrote:
there appeared another video, that might help you:
http://www.youtube.com/watch?v=yTN4kKMu ... r_embedded


Wow, thank you! This is very interesting :!:


          Top  
 
 Post subject: Re: New Here!
PostPosted: Sat Jun 23, 2012 1:54 pm


Joined: Wed May 16, 2012 4:55 pm
Posts: 17
My progress...

Image
Image


          Top  
 
 Post subject: Re: New Here!
PostPosted: Mon Jul 02, 2012 8:52 pm


Joined: Wed May 16, 2012 4:55 pm
Posts: 17
I have roughly tuned an octave above the fundamental notes on the hung. Check out the video:

http://www.youtube.com/watch?v=CHy2a1SNHIY

~Steve


          Top  
 
 
Post new topic Reply to topic



Display posts from previous:  Sort by  
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

cron

Board index » Foyer » English

 

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group